triton

hook1. com

Advertising makes this board possible -- Please click on this banner now!

Owners Page

Trolling Motors

Outboard Motors

Open Discussion

Boats For Sale

SUBJECT: 332c in console of 2001 tr-20

Submitted by whale (71.96.135.46) from TEXAS on

Has anybody installed a 332c in the console of 2001 tr-20? Will the 332c fit the hole?

kdr (68.217.199.142) from GEORGIA says 332c in console
This is to help out whale from Texas, I have '07 TR196 with a 332c in the console looks and works good . I don't know if the set up for console has changed much.
Tritonstan (199.209.241.14) from ALABAMA says 332C in dash
You can go to this site:
http://www.lowrance.com/upload/Lowrance/Documents/Manuals/LMS-337CDF_0156-071_121704.pdf
Page 40 has an in-dash template that gives the dimensions for the cut-out.
I installed one in my '04 Tr-20X with no change necessary. It came with an X-87 in-dash and the cut-out was identical. Good luck.

Name:

Password:
(Sponsors/Supporters only)

State:

Email Address:

Subject:

Comments:

Home

This message board created by: WebMasters International, Inc. (WMI) address mail to wmi@wmi.org