|
|
|
|
|
|
|
|
# 27947: Winterizing the motors, by David R. (72.79.148.227) from PENNSYLVANIA on 12/6/2009 9:25:00 AM
- Draining engines. by Alex from GA #10518 from GEORGIA on 12/21/2009 8:47:00 AM
# 27945: fuel compatible parts ., by David R. (72.79.136.177) from PENNSYLVANIA on 11/18/2009 1:28:00 PM
- Wish I knew by FreeOnBoard from TEXAS on 11/23/2009 12:41:00 PM
# 27944: 78 vs 85 fuel consumption, by David R. (72.70.216.66) from PENNSYLVANIA on 11/11/2009 7:03:00 PM
- Power rating method by FreeOnBoard from TEXAS on 11/13/2009 3:34:00 PM
# 24227: Formula/ Thunderbird Boats/ Any Good?? Dunk??, by Ron (65.83.87.128) from FLORIDA on 8/20/2002 12:24:00 PM
- I got one by Hawkeye (68.49.128.86) from VIRGINIA on 8/20/2002 4:26:00 PM
- Thanks Hawkeye. Any others??? Hawkeye....... by Ron (65.83.87.128) from FLORIDA on 8/20/2002 5:12:00 PM
- Backyard project for me by Hawkeye (68.49.128.86) from VIRGINIA on 8/20/2002 7:40:00 PM
- Thanks, Man. by Ron (67.33.26.159) from FLORIDA on 8/20/2002 10:46:00 PM
- P.S.--- about your Suzuki... by Ron (67.33.26.159) from FLORIDA on 8/20/2002 11:00:00 PM
- Seen the add by Hawkeye (129.86.240.203) from VIRGINIA on 8/21/2002 8:56:00 AM
- Formula by Ancient Mariner (204.2.54.185) from TEXAS on 8/21/2002 1:51:00 PM
- Another One by WarrenR (209.240.198.63) from CALIFORNIA on 8/21/2002 8:29:00 PM
- Forumla Quality by Shane (66.139.229.33) from TEXAS on 8/22/2002 12:09:00 PM
- formula by martin (141.154.53.104) from MASSACHUSETTS on 2/25/2003 4:10:00 PM
- 24, foot.,formula thunderbird 68,model by therodz (66.109.193.192) from WASHINGTON on 3/8/2003 1:32:00 AM
- where would I find the boats serial or vin #? by ken (172.160.237.17) from TEXAS on 7/4/2003 3:30:00 AM
- infomatoin by tom keith (68.88.237.216) from texas on 11/22/2005 11:50:00 PM
- 1984 formula fierbird 20ft boat by tom keith (68.88.237.216) from TEXAS on 12/8/2005 8:23:00 AM
- what's best by nfl007 from ALABAMA on 9/10/2009 8:25:00 AM
- best wholesaler by nfl007 from ALABAMA on 9/17/2009 9:36:00 AM
# 27940: Do 1 cylinder engines shake too much?, by deepdrop (75.69.134.198) from NEW HAMPSHIRE on 9/4/2009 5:55:00 PM
- small outboard by Les #11903 from VIRGINIA on 9/12/2009 11:08:00 AM
# 27939: utility trailer for inflatable?, by deepdrop (75.69.134.198) from NEW HAMPSHIRE on 8/11/2009 2:29:00 PM
- Ever thought about .... by Spooled Again from OTHER on 8/15/2009 7:39:00 AM
# 27936: 1973 century resorter 18 foot, by gary myska (76.30.1.42) from TEXAS on 7/29/2009 9:52:00 PM
- I'm not sure what you are looking for. by Gene from GEORGIA on 8/6/2009 11:28:00 AM
# 27931: Merc 125 L4 - Questions about water pump replacement, by FreeOnBoard from TEXAS on 6/10/2009 1:57:00 PM
- Manual by Les #11903 from VIRGINIA on 6/20/2009 8:48:00 AM
- correction by Les #11903 from VIRGINIA on 6/20/2009 1:02:00 PM
# 27928: foam in stringers, by David R (72.70.203.132) from PENNSYLVANIA on 3/14/2009 7:18:00 PM
- The foam was used to form the stringers by Brad from CALIFORNIA on 4/25/2009 4:26:00 AM
# 27925: test, by Gerry, BFHP from VIRGINIA on 3/5/2009 7:53:00 AM
- to the both of you~ by Brad from CALIFORNIA on 3/13/2009 4:59:00 AM
# 27926: test, by Dunk from VIRGINIA on 3/5/2009 7:54:00 AM
- Hello~ by Brad from CALIFORNIA on 3/13/2009 4:58:00 AM
# 27921: red oak as an under base for fibre glas, by David R . (72.79.135.85) from PENNSYLVANIA on 12/31/2008 9:39:00 AM
- have you ever heard of by Gene from GEORGIA on 12/31/2008 12:08:00 PM
- Red oak vs cedar by Spooled Again from OTHER on 1/5/2009 12:19:00 AM
- Depends on the height of the insert by FreeOnBoard from TEXAS on 1/5/2009 5:17:00 PM
# 27917: Looking for Mr Dunk, by Jesper (69.253.195.61) from NEW JERSEY on 11/3/2008 8:40:00 AM
- Yeah... by Dunk from NEW JERSEY on 11/6/2008 3:29:00 PM
- Worker boat by Jesper #15485 from NEW JERSEY on 11/20/2008 8:24:00 AM
# 27919: 1993 25 HP Merc Missing at High Speed, by Phytoplankton #14174 from CALIFORNIA on 11/14/2008 5:40:00 PM
- carb by cmm #15449 from MASSACHUSETTS on 11/15/2008 11:46:00 AM
# 27333: Mercury Optimax problems - dont ever buy one, by Richard E. Moore (47.234.0.51) from NORTH CAROLINA on 6/24/2005 3:19:00 PM
- Good Grief by jethro (172.164.121.129) from ALABAMA on 6/24/2005 9:48:00 PM
- Troll by Jerry (24.238.247.134) from TEXAS on 6/25/2005 12:30:00 AM
- Mercury is junk by Don (66.157.50.252) from LOUISIANA on 6/25/2005 10:52:00 AM
- Geez...... by Minx (68.107.226.198) from VIRGINIA on 6/26/2005 9:35:00 AM
- Yamaha ha ha by Jerry (24.238.247.134) from TEXAS on 6/26/2005 4:32:00 PM
- Well Minx... by Dunk79 (68.44.136.169) from NEW JERSEY on 6/26/2005 6:46:00 PM
- Just so that you know...... by Minx (68.107.226.198) from VIRGINIA on 6/27/2005 6:02:00 AM
- Mercury Optimax problems - dont ever buy one by Richard E. Moore (47.234.0.51) from NORTH CAROLINA on 6/27/2005 9:24:00 AM
- Court by Brian (67.80.115.113) from NEW JERSEY on 6/28/2005 10:34:00 AM
- Mercs by Richard (65.41.228.110) from FLORIDA on 6/28/2005 5:04:00 PM
- e-tec or verado by tha merkinator (67.51.235.206) from NEW YORK on 7/5/2005 6:43:00 PM
- Update to Optimax issues by Richard E. Moore (47.234.0.51) from NORTH CAROLINA on 7/11/2005 4:54:00 PM
- Just outta curiosity.... by Minx (68.107.226.198) from VIRGINIA on 7/12/2005 7:55:00 PM
- reply to Minx.... about Optimax by Richard E. Moore (47.234.0.51) from NORTH CAROLINA on 7/13/2005 8:33:00 AM
- Sorry....I just got by Minx (68.107.226.198) from VIRGINIA on 7/16/2005 8:50:00 AM
- 150 Mercury Optimax 2005 model by Reg Allison (168.209.98.35) from South Africa on 7/30/2005 2:33:00 PM
- 2004 busted by opticrap #15188 from FLORIDA on 10/13/2008 11:00:00 PM
# 27914: Boating in mexico sea of cortez, by Eric r (76.105.109.142) from GEORGIA on 10/7/2008 8:53:00 PM
- Bring it. by Alex from GA #10518 from GEORGIA on 10/12/2008 9:46:00 PM
# 27913: OMC Outboard Remote Control, by Edward59 #14743 from MISSOURI on 10/4/2008 9:51:00 AM
- Stop!!!! by Gene from GEORGIA on 10/6/2008 10:17:00 AM
# 27912: Sea Pro Boats NO MORE, by Rob (70.18.144.40) from VIRGINIA on 9/17/2008 11:37:00 PM
- Yep... by Dunk from NEW JERSEY on 9/22/2008 7:45:00 PM
# 27875: What happen to Dunky??, by Jesper (205.188.117.73) from NEW JERSEY on 1/30/2008 11:12:00 PM
- don't know by Larry-Southern Indiana from INDIANA on 9/22/2008 4:42:00 PM
# 27911: Replacing outboard water pump impeller, by Rob (70.18.144.40) from ALABAMA on 9/17/2008 11:23:00 PM
- Depends on use by FreeOnBoard from TEXAS on 9/18/2008 11:21:00 AM
# 27910: This is cool:, by Brad from CALIFORNIA on 9/12/2008 10:40:00 PM
- It's an old design. by Alex from GA #10518 from GEORGIA on 9/17/2008 9:59:00 PM
# 27909: Mariner 150, by Scott (71.77.222.206) from NORTH CAROLINA on 9/8/2008 5:58:00 PM
- Temperature sender/switch by FreeOnBoard from TEXAS on 9/9/2008 11:03:00 AM
# 27905: best wishes Dunk, by beachblitz (205.148.53.200) from NEW JERSEY on 7/30/2008 4:55:00 PM
- Thanks Beach.... by Dunk from NEW JERSEY on 8/18/2008 10:24:00 PM
# 27907: Dunk or Others_Wheel VS RPM?, by Saul (68.84.44.153) from NEW JERSEY on 8/15/2008 12:19:00 PM
- Yes, You Are Wrong. by Dunk from NEW JERSEY on 8/18/2008 10:21:00 PM
# 25068: is sunbird boats out of business, by stressfree (65.119.124.49) from DELAWARE on 3/9/2003 6:53:00 AM
- Sunbird by TomA (208.61.166.198) from NORTH CAROLINA on 3/9/2003 9:39:00 AM
- No longer made by Smith Mountain Lake from VIRGINIA on 3/9/2003 5:46:00 PM
- thats what i thought by stressfree (65.119.125.97) from DELAWARE on 3/10/2003 5:50:00 AM
- New Sunbird by Jd (66.157.81.187) from LOUISIANA on 3/16/2003 11:40:00 PM
- sunbird boat by Kevin Maddox (68.184.77.86) from ALABAMA on 4/13/2003 2:50:00 PM
- I had a sunbird SPL15.5 by alden (154.5.205.167) from OTHER on 7/1/2003 2:18:00 PM
- No power When Engaged by dDave T (152.163.252.38) from MICHIGAN on 7/7/2003 9:24:00 PM
- Sunbird Boat For Sale by Albert (67.75.136.26) from NORTH CAROLINA on 7/19/2003 8:35:00 PM
- Hey Jd... by Brian (67.80.123.133) from ALABAMA on 7/21/2003 9:05:00 PM
- OMC outdrive alignment tools by Robert (216.79.116.71) from SOUTH CAROLINA on 3/23/2006 1:06:00 PM
- Sunbird 230 wa by don callahan (76.3.90.60) from ALABAMA on 8/20/2006 1:36:00 PM
- sunbird sport 17 o/b by Toddy (209.102.137.86) from ALABAMA on 4/10/2007 6:59:00 PM
- Owners manual? by Jacob Cavanaugh (69.66.89.202) from IOWA on 5/2/2007 11:59:00 AM
- 1995 Sunbird Neptune Center Console by Raymond (24.211.230.78) from NORTH CAROLINA on 6/8/2007 3:03:00 PM
- sunbird boat owners manuel by Mike (207.5.233.127) from MAINE on 7/4/2007 11:36:00 PM
- 1997 sunbird owners/shop manual by ray (205.188.116.73) from FLORIDA on 7/5/2007 1:28:00 PM
- sunbird boat by michaelh #14529 from ALABAMA on 7/26/2008 9:46:00 PM
- sunbird boat by michaelh #14529 from ALABAMA on 7/26/2008 9:53:00 PM
# 27902: 2000 Fitch Popping Fuse PLEASE HELP!!!! DUNK, SAL, SEAHORSE, SOMEONE!!!, by Steve (67.86.42.70) from CONNECTICUT on 7/17/2008 11:48:00 PM
- Grounds.. by Dunk from NEW JERSEY on 7/26/2008 5:41:00 PM
# 27904: 1994 Johnson 15hp Break-in Procedure, by Rick (12.179.197.226) from NORTH CAROLINA on 7/25/2008 2:48:00 PM
- Yep... by Dunk from NEW JERSEY on 7/26/2008 5:35:00 PM
# 27900: '88 OMC throttle/gear shift getting stiff - anybody know how to lube the inside works, by FreeOnBoard from TEXAS on 7/7/2008 12:25:00 PM
- I took mine apart before but that was not it......... by RNuts #12938 from ALABAMA on 7/8/2008 11:40:00 AM
- Thanks, RNuts, I'm reaching the same conclusion by FreeOnBoard from TEXAS on 7/8/2008 1:58:00 PM
- Yeah, I tried spraying WD-40 in the cable with no luck by RNuts #12938 from ALABAMA on 7/8/2008 3:56:00 PM
- Amazing results with new cables by FreeOnBoard from TEXAS on 7/16/2008 2:41:00 PM
# 27901: Mounting Riptide Trolling Motor, by windknot (74.197.157.4) from NORTH CAROLINA on 7/11/2008 6:29:00 AM
- Not in front of the children! by RNuts #12938 from ALABAMA on 7/15/2008 12:13:00 PM
# 27898: Bilge Pump Wiring, by Buckeyesaltfisher (24.223.171.88) from OHIO on 6/29/2008 3:22:00 PM
- Bilge pump wiring by Bill Huffman #14290 from TEXAS on 7/4/2008 10:46:00 AM
# 27894: starboard side manifold is hot and port side manifold is cold, is this normal?, by Gurkan (69.112.203.188) from NEW YORK on 6/24/2008 10:54:00 PM
- cooling by Phytoplankton #14174 from CALIFORNIA on 6/25/2008 5:53:00 PM
- Manifold by Greek #13637 from TEXAS on 6/26/2008 11:32:00 AM
# 27893: 2001 Merc. 5.0L Back firing at idle, by Gurkan (67.101.255.212) from NEW YORK on 6/23/2008 1:29:00 PM
- backfiring by Phytoplankton #14174 from CALIFORNIA on 6/24/2008 3:45:00 PM
# 27892: 1988 Johnson 88, by cmm (24.60.97.200) from MASSACHUSETTS on 5/31/2008 4:46:00 PM
- Maybe by RNuts #12938 from ALABAMA on 6/2/2008 4:30:00 PM
# 26405: Gelcoat spray gun, by Fred (64.12.96.71) from NEW JERSEY on 3/8/2004 12:06:00 AM
- Preval Disposable by Timm40 (128.172.142.31) from VIRGINIA on 3/8/2004 11:30:00 AM
- praval by reellife (67.1.117.23) from ALABAMA on 3/8/2004 11:03:00 PM
- Thinning gelcoat ... Preval by Reel-Rascals from MASSACHUSETTS on 3/9/2004 2:14:00 PM
- Thanks by Fred (152.163.252.67) from NEW JERSEY on 3/9/2004 10:52:00 PM
- Gelcoat by Timm40 (128.172.142.31) from VIRGINIA on 3/10/2004 8:46:00 AM
- Preval Sprayers - a Warning by Thom (198.99.246.254) from WEST VIRGINIA on 3/11/2004 7:57:00 AM
- True by Timm40 (128.172.142.31) from VIRGINIA on 3/11/2004 8:04:00 AM
- Walther Pilot Misch-N by Andrey #13834 from OTHER on 5/27/2008 8:48:00 AM
# 27890: 1983 175hp johnson, by r.s. (129.42.208.182) from NEW YORK on 5/19/2008 1:09:00 PM
- This might help by FreeOnBoard from TEXAS on 5/19/2008 4:36:00 PM